Wanted mini shaper

[canuck750]

Looking for a 7” mini shaper, SouthBend or similar, must be complete and operational, cosmetic condition not a concern.
Text Jim 780-929-0919
Located in Edmonton, I will pay for shipping from most anywhere in Canada.

 

[whydontu]

Here’s one on Vancouver Island

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

 

[Tom O]

The better Atlas ones have a foot supporting the end of the table.

 

[TOBARApprentice]

I have a complete Atlas 7B with stand.

 

[TOBARApprentice]

Actually have 2 of them so ok to let one go.

 

[TOBARApprentice]

Called and left a message…..

 

[canuck750]

I have a complete Atlas 7B with stand.

Can you please contact me on my cell or send me your phone number?
Jim 780-920-0919

 

[TOBARApprentice]

Jim. Above you have given 2 different numbers. 780 929 0919 and 780 920 0919. I’ve texted both….. would you clarify which one is correct. Cheers.

 

[canuck750]

Oh dear, I see my dumb mistake now!
780-920-0919

I got your message, can you send some pictures when you get back?
My email is [email protected]

Thanks!
Jim

 

[TOBARApprentice]

Sure. No problem.

 

[canuck750]

My new to me Atlas 7B Shaper arrived on Friday, Derek did an exceptional job packing the machine, securing it to a pallet etc. I am really looking forward to putting it to use this fall. Right now I have a couple motorcycle projects to finish, Learning to use the shaper will be a good fall project.
The YouTube channel ‘Jon’s Workshop’ has a series of videos restoring an Atlas 7B British made clone and several videos using the shaper.
The build quality of this little machine is impressive. It would look great sitting next to a small Atlas Horizontal Mill…..

 

[Susquatch]

My new to me Atlas 7B Shaper arrived on Friday,

I'd love a little shaper like that....

 

[KeeponDragon]

Nice to see a few success stories of members selling to members
great looking shop, with a nice addition to the floor

 

[Bandit]

A very nice looking unit, I don't use mine every day, but it's staying.
Looks like some nice 2 wheelers in the back ground! Moto Guzzi.

 

[Mcgyver]

The better Atlas ones have a foot supporting the end of the table.

That is I believe the 7A vs 7B

 

[whydontu]

We like photos of motorcycles…

 

[Tom O]

That is I believe the 7A vs 7B

I thought the 7b had the table support like this one does as well as the guards.

 

[Mcgyver]

I didn't realize there was a 7 as well, but you got me questioning it and I found the image below. My point was its the 7B that had the table support and 7A (and apparently the 7 as well) didn't have it

 

[Susquatch]

My point was its the 7B that had the table support and 7A (and apparently the 7 as well) didn't have it

I'm confused now. Easy to do. Is the one to look for the 7B?

 

[Mcgyver]

imo yes. All things being equal, to me it makes sense to have the support foot than not, but no doubt folks have done good work on the ones without. Just my view, I have a 7b for awhile and it worked well enough, but I'm a long way from a shaper expert.