Dabbler
ersatz engineer
Those of us who know, know - from bitter experience, or near misses.keep your face away from the handle
Those of us who know, know - from bitter experience, or near misses.keep your face away from the handle
They are as handy as a pocket on a shirt, provided they stay oiled, and you keep your face away from the handle
I agree, one usually lives in my pickup, they’re great for trailers or picking up project vehicles. Although I think I had a floor jack with me on one run, buddy dropped it on the floor and the handle got him in the forehead. Knocked him right on his tookas for a few minutesWhen you were over here the other week, I had that hooklift unit i was installing on that F650 in the first bay. When I was figuring out exactly where it was going on the truck frame in order to get the mounting plates to clear all the obstacles and whatnot, I used my Jackalls to shove it forward and back a few dozen times. Very handy tool in the shop too.
What pray tell, is a "black noise maker"?
When we were kids, where the Glen Abby golf course now stands, we'd hike to the area, but stayed off that farmer's fields... He had a 'salt and pepper gun' a 10 gauge loaded with salt - you provided the pepper, by moving fast off his land.
@Darren answered already, but--
I wanted to add that Jack-All was a Canadian version of the 'farm jack', but it was far better made than anything buy-able today. The centre beam was hot rolled (at Stelco if you'd like to know) and -hot punched- for the lifting holes (later drilled for accuracy). It had an original capacity of 12,000 lbs, later derated to 8,000 lbs when they went to malleable Iron as the carrier, rather than cast steel.
I own one of the 8,000 lbs ones, but in my 4X4 days I had a 5.5 ft 12,000 lb one before I could afford a winch.
I knew what that was! Another 30 year’s and I’ll be mostly Canadian with an Australian voice!Jack-All was a Canadian version of the 'farm jack'
Been there, got the T shirt (and the lathe and mill)If a burglar can bring the lathe or mill up those
Whew, I'm glad you clarified that some of us were starting to worry.... but I paid for them first.
If I only wanted one camera (outside) , going to an inside monitor, do I still need a router? Or can it all be hardwired?Motion sensors to limit movement, well placed allows movement within protect zone while on. Two (or more) key pads Main Entry(s) and master bedroom. Lets you see which zones are active (open or motion).
For camera systems can go one of two ways.
Stand alone Wireless ip system, there are lots, some better than others. Remember they still require power.
Or dedicated recording systems that also hardwire into you router are lot better. Again don't go wireless here as power must be provided anyway. Same note as alarm system.
If I only wanted one camera (outside) , going to an inside monitor, do I still need a router? Or can it all be hardwired?
If it wasn’t going to record at all, you wouldn’t need any memory storage space, right? Basically a motion activated trail cam going to a screen to watch what the camera sees, when it senses movement
IP cameras such as Topo by TP-link use the home/shop wifi to connect to the internet cloud bridge for you to view to any where in the world.You can still buy such devices, however, they get quite expensive. I'm not aware of any wired trail cams, but there are wireless ones.
I think your cheapest solution is a wireless router that does not connect to the internet. In this case you can get long range WiFi cameras (Toucan or Arlo to name just two) that can be viewed by another monitor or even your phone over the wireless (WiFi) network in your home. But you won't be able to see it when you are away from home.
Another solution that might be even cheaper is a doorbell camera or a baby monitor.
IP cameras such as Topo by TP-link use the home/shop wifi to connect to the internet cloud bridge for you to view to any where in the world.
Silly boy, you didn't have your coffee this morning.....Ya, but unless I misunderstood, @Chicken lights didn't want something with an internet connection. I don't think he has one. I am fairly certain that he does not have WiFi. Might be good to read his first post again.
Chicken - with all this amazing advice you have been given, what are your thoughts?
With you being gone so much, I'm having a bit of a problem trying to understand your needs. What are you trying to achieve here?