-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Milling machine-mechanic’s special
- Thread starter Frcsc6el8
- Start date
Tomc938
Ultra Member
Nice!
Will be a labour of love to restore it to working condition. And a great learning curve to boot.
Nice solid frame to work with !!
Spend some time cleaning up the ways and dovetails, then smear it full of lubricants.
I see there are pockets in the base for adjustment feet installation when positioned on your shop floor. It is important to use these to support the castings and avoid stress cracks.
You will gain a ‘wealth‘ of knowledge by taking it apart.
Spend some time cleaning up the ways and dovetails, then smear it full of lubricants.
I see there are pockets in the base for adjustment feet installation when positioned on your shop floor. It is important to use these to support the castings and avoid stress cracks.
You will gain a ‘wealth‘ of knowledge by taking it apart.