• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

2.2 KW VFD, $70.39, Fullfilled by Amazon.ca

Yes I mounted the original Power on/off switch from the drill press front panel in a 4" X 4" X2" box. It is a DPDT switch so it works for 240 volt.



The green "run" and red "stop" buttons start and stop the spindle. The display is active whenever the vfd is powered.
 
John Conroy said:
Yes I mounted the original Power on/off switch from the drill press front panel in a 4" X 4" X2" box. It is a DPDT switch so it works for 240 volt.



The green "run" and red "stop" buttons start and stop the spindle. The display is active whenever the vfd is powered.
Click to expand...
Do you have the capability now to reverse the drill press with the vfd switch?
 
Does this VFD allow for inputting reference HZ to RPM conversion values thus allowing RPM to be displayed?
 
DPitman, yes it can be reversed. You can select direction with the FWD/REV key. In the first pic you can see the fwd LED is illuminated above the frequency display and in the second pic the rev LED is lit. You don't need to press stop before changing directions. There is a short video at this link.

https://johnconroy.smugmug.com/-Craftex-Drill-press/n-2tszPn/i-H9s87fv/A







Craig, it may have the ability to convert frequency to rpm but I couldn't use that feature because I am using miltiple pulley ratios so I never tried to learn how to set that up.
 
Last edited:
Ordered one. Just because.
It’s will either be for my surface grinder coolant pump or a lathe conversion.
 
Some one post a link to this $55 VFD please. It's not the one I originally posted.
 
You must log in or register to reply here.
Back
Top