• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Woodruff Key numbers ?

F

frankonthetis

Frank
Rebuilding an old Atlas 10D lathe but as no parts documentation anywhere on this one using the parts list from a Atlas 10F. It shows woodruff type keys with numbers like No15, No9, No3 etc. In this pdf https://www.fastenermart.com/files/woodruff-key-dimensions.pdf it lists woodruff keys with dimensions.
Is it safe to presume that the old Atlas documentation numbers and the FastenerMart pdf are compatible? Missing a few keys and if available would prefer to purchase.
Thanks
 
That chart should be correct, measure your key slots and cross reference them.
 
Last edited:
Thanks Thomas and Gerrit for your replies.
Gerrit when clicking on this link it just gets me to the Title page showing how to register etc. Am a member of both the Logan & Atlas/Craftsman groups.io but see nothing that allows me to search. Is that information available anywhere else? Have contacted Lathes.co.uk and have ordered his Atlas/Craftsman compilation manual but was told no parts schematics for the 10D available as it appeared to be a one year wonder. Robert Downs has made a lot of Atlas/Craftsman information available but little for the 10D.
 
Requests to join that group have to be approved by the moderator. After that, you'll be able to access the Files section and other things.

Craig
 
Thanks Craig, have been approved to both the Logan and Atlas/Craftsman groups. When clicking Gerritv’s link it took me to the signup page rather than the .pdf. Now wonder if you need to pay something for access to files like on the HM site.
 
Thanks Gerrit for that link. Appear to be having some issues with the Atlas/Craftsman groups.io but sent an email to the moderator. Upgraded O/S on computer and may have lost my membership there. Did find the above link in your post #7, thank you, and have seen that from the OWWM site. Your link shows the part prices and another OWWM one shows the part numbers which is where the key way #'s in post #1 came from. Thanks again for responding.
 
your membership on groups.io is tied to your email address, so upgrading an OS won't make any difference to your membership.
 
You must log in or register to reply here.
Back
Top