• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Machine Tumbler Gear

Machine
D

Dunc1

New Member
I have a Busy Bee B2227L 10 x 18 inch lathe. Wondering if anyone has a plan to build a tumbler gear for this lathe. This allows reversing the threading feed to allow cutting left-hand threads. Thanks
 
For my B2227L, I did a bunch of thinking on this, and decided that the mechanics were more effort than the value. My choice was to install one of @jcdammeyer ‘s ELS electronic lead screw controllers, and now I have pushbutton control of lead screw operation without the need for change gears and should be able to cut RH or LH threads.

My write up is under ELS Electronic Lead Screw Concept, do a search for jcdammeyer and you’ll find tons of stuff, John designed and produces an ELS controller board.
 
Last edited:
You must log in or register to reply here.
Back
Top