• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Existing Feature torrent lathe T.72-42

elmo maturgo

elmo maturgo

Member
Hello, Guys can any one help me for the status of my lathe machine Torrent T.72-42 the thread chart is not visible also the RPM chart not visible, can please send it to me some a good copy or picture of threading chart and RPM chart thank you
 
elmo maturgo said:
Hello, Guys can any one help me for the status of my lathe machine Torrent T.72-42 the thread chart is not visible also the RPM chart not visible, can please send it to me some a good copy or picture of threading chart and RPM chart thank you
Click to expand...

Welcome from farm country south of Chatham Ontario.

If the folks at lathes.co.uk can't help, you can always make your own charts by measuring the speeds, feeds, and even counting teeth if need be.

This might be a good idea anyway as the charts are sometimes wrong or are missing some of the data. An in depth review of the combinations will sometimes reveal secret combinations that were not documented. This happened on my own lathe which didn't have a 1.6mm pitch I badly needed. Turns out it actually did have that pitch, it just wasn't documented on the threading chart.
 
Last edited:
Susquatch said:
Welcome from farm country south of Chatham Ontario.

If the folks at lathes.co.uk can't help, you can always make your own charts by measuring the speeds, feeds, and even counting teeth if need be.

This might be a good idea anyway as the charts are sometimes wrong or are missing some if the data. An in depth review of the combinations will sometimes reveal secret combinations that were not documented. This happened on my own lathe which didn't have a 1.6mm pitch I badly needed. Turns out it actually did have that pitch, it just wasn't documented on the threading chart.
Click to expand...
Many thanks for the Idea, and many thanks for warm welcome it is Bless for me for I am being a member of this group God Bless for all the members
 
elmo maturgo said:
Hello, Guys can any one help me for the status of my lathe machine Torrent T.72-42 the thread chart is not visible also the RPM chart not visible, can please send it to me some a good copy or picture of threading chart and RPM chart thank you
Click to expand...
Check out this post :

canadianhobbymetalworkers.com

Torrent T.72-42 16x40 lathe

I'm upgrading lathes and selling off my current one. I've listed it on kijiji asking 6,000 but its listed with some negotiation room. Its a great lathe, D1-6 camlock headstock, full gear head and quick change for threading metric or imperial, 5hp, DRO (slowly getting installed), I have a 5hp...
canadianhobbymetalworkers.com canadianhobbymetalworkers.com

Looks like the chart is legible, you might be able to make up something.
 
whydontu said:
Check out this post :

canadianhobbymetalworkers.com

Torrent T.72-42 16x40 lathe

I'm upgrading lathes and selling off my current one. I've listed it on kijiji asking 6,000 but its listed with some negotiation room. Its a great lathe, D1-6 camlock headstock, full gear head and quick change for threading metric or imperial, 5hp, DRO (slowly getting installed), I have a 5hp...
canadianhobbymetalworkers.com canadianhobbymetalworkers.com

Looks like the chart is legible, you might be able to make up something.
Click to expand...
Yes sir this is same of my lathe machine, many thanks for the sharing this is blessing for me..... God Bless you sir
 
You must log in or register to reply here.
Back
Top