Threaded rod and other fasteners for sale

[Jimbojones]

I have a number of threaded steel rods for sale, both new and 2nds available.

2nds are in stock, new rod has to be pre-paid/ordered (available 1-5 business days). Cutting to specific lengths is also available at an extra cost (pre-paid, also).

All rods have been stored in-doors/temperature controlled.

2nds - Zinc coated, cut from damaged, longer lengths. May contain
mild bends but very usable in shorter lengths. Only sold as listed.
In stock:
(10) 3/8-16: approx 4 ft lengths: $3 ea compared to $4.50 for 3' at discount store
(12) 1/2-13: approx 4 ft lengths: $4 ea compared to $7 for 3'
(2) 5/8-11:approx 5 ft lengths: $6.65 ea compared to $10 for 3'

New stock: many choices available - prepayment required
Bare, Zinc-coated, B7(harder) or Stainless Steel, limited Brass
SAE, Metric, Acme threads
Right-hand thread; Left-hand available in limited styles
3' to 12' lengths (depends on type ordered)
Competitive Pricing - much cheaper than Big Box stores and further discounts available if ordering multiple pieces.

If interested in new or 2nds, drop me a note with a list of what your looking for. Will need to know:
quantity
diameter & length (if known)
thread pitch
material or coating
right-hand or left hand thread
if any custom cutting is required
when you require the material

Coupler nuts and other SAE/Metric Fasteners (e.g. nuts, washers, lock washers, etc) are also available. Again, email me with your specs and I'll get back to you with pricing.

 

[Jimbojones]

5/8" rods gone; looking at getting some more in 1/4, 5/16, 5/8, 3/4 and 7/8 diameter (can get up to 1-1/2" but rarely in 2nds)

Again folks, I can get other rods/fasteners in too. Prices are especially good on SAE fasteners since those come in bulk and not small pack/singles.

 

[Jimbojones]

Thanks for the orders received to date. 35mm rods selling fast and a number of other rods/fasteners as well.

Wanted to let you guys know I also have access to Service Trays; fully-loaded trays with Imperial, Metric, Bolts, Screws, Pins, etc.

Not those cheap plastic bins but Steel ones that can also be loaded in to a cabinet with slider drawers (4 or 6 drawer models). I personally own some of these and the cost/hassle it's saved in running to stores to pick up occassional fasteners has more than paid for the trays themselves. Also, better organization than a bunch of fasteners in random bins. You can buy them either pre-filled or empty and make your own configuration. Anyone interested can drop me a PM with the type they're looking for.

 

[Dabbler]

Keep me in mind for a piece of 3/4 and 7/8 if you get a second.... I should have looked at the service trays, just to be sure what you were talking about... I think I know, but I should have asked.

 

[Jimbojones]

re: service tray. You can buy them either empty or filled with assorted fasteners. 

As an example: https://www.boltdepot.com/Empty_assortment_bins_and_Accessories_Large_metal_trays.aspx

 

[Dabbler]

A little different from what I had imagined, but they look better!