• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Tapering attachment for kearney and tucker no 3

Tom Kitta

Tom Kitta

Ultra Member
So I got this attachment few weeks ago but it's too big for my machine. I have 2e and this one appears to be for #3. The round part with ram on the right side of the picture is about 1.5 inches wider on each side then my column.

If anyone has a large horizontal this is for you. Mine is 3500 lbs so I assume no 3 is around 6000 plus.

The attachment itself is over 200 lbs, each piece is around 100.

Nothing wrong with it, other then signs of use.

I am asking just $400.
9a38354edea371e158f773dda2e65b0f.jpg


Sent from my JSN-L23 using Tapatalk
 
You must log in or register to reply here.
Back
Top