Taig 2019 CNC mill and accessories

[Kelly McLaughlin]

I've decided to sell my small CNC mill, It'd had little use in the years I've had it but it's been fun. I bought it in 2015. The pics below show it's current installation. I converted it from 1/3 hp AC to 550 watt DC with a 2 to 1 tooth belt setup. This gives 0 to 10,000 RPM at the spindle manually controlled by the pot in the front of the control box. I have a brand new 4th axis rotary table that the controller can run but the software I used didn't have provision for. I have a mach 3 licence that I bought but I found it more complicated than I wanted to deal with. the software I used was draw cut and quite simple but suited my needs well. asking 3000.00 for everything. please call I much prefer it to texts, there is a lot to fill a prospective buyer in on beyond this ad. : ) 403-878-2555 spindle is ER16 I have collets to 3/8 I'll dig out all the bits and add some pics Friday evening or Sat.

 

[Kelly McLaughlin]

Here's the accessories, metric collets in 3,5,6,8mm(4 seems to be missing) and standard from 1/16 to 3/8 by 16ths an assortment of hold downs, wrenches made on the mill an assortment of carbide mills and ball end mills and the 5c rotary table. the vacuum attachment is height adjustable. It is equipped with homing / limit switches on X, Y, Z .