• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Syil 4 Gremlins

C

Crosche

Super User
Yesterday my CNC started to drift in the X axis and basically created a "stepped" effect to the part I was cutting. Then when commanded to return to the zero position, the cutter was off the mark by about 1/32". I checked to make sure that the coupling wasn't slipping; which it isn't so today, I was planning to re calibrate the X axis and noticed that although Mach3 indicated the the cutter moved 2" the encoder readout on the servo motor in Mach3 stated the cutter moved 2.024", so I am not sure what is going on. Firstly, I am not sure why the machine would have lost calibration in the first place and secondly I don't understand why only the X axis is being problematic. Anyone have any thoughts?
 
I’ve noticed bizarre readings when the pulley was slipping, not the belt but the screw holding the hub in place. Maybe?
 
I don't know if your machine has steppers or servos. My syil AEX250 will miss a step or two on a long production run but it is minor and it also always cuts the part oversize so I can deal with that.
 
You must log in or register to reply here.
Back
Top