• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Stainless belt guards for my mill

John Conroy

John Conroy

member
Premium Member
Just a quick little project. The original plastic belt guards for my mill were both broken. New ones are available but for $27 USD each!! I cut some new ones from some stainless steel sheet material and used a 3M Roloc disc mounted in a drill chuck to make evenly spaced swirly patterns. Then I drilled some evenly spaced holes to match the openings in the head of the machine.

P2160778_zps5f8db4cb.jpg


P9011134_zpsgdkstm1w.jpg


P9011133_zpssypotv0c.jpg


Now that I have this machine mechanically sound the next thing on my to-do list is to disassemble and re-paint it.
 
"Swirly patterns" haha looks great! I think that pattern is called "engine turned" but I could be wrong.

Sent from my B15 using Tapatalk


Edit: what color scheme are you going with? Classic machine grey/green or are you going to get creative?
 
Thanks Eric, I knew there was a name for the swirly's but could not think of it. I'm probably going to stick with classic grey but I'm not 100% sure what colour yet.
 
I could giving it a fresh coat of the current blue grey look too. Fresh paint always looks great.

The swirlys look fantastic!

JW
 
You must log in or register to reply here.
Back
Top