• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Some times you need 3 hands.

How do you stop the rare earth magnet from cracking? I find that they are quite brittle and ton+ of pressure would shatter any of the magnets I have...
 
Jimbojones said:
How do you stop the rare earth magnet from cracking? I find that they are quite brittle and ton+ of pressure would shatter any of the magnets I have...
Click to expand...

I only needed to press out some bushings on a not flat part so I had no problems. But other people have mentioned the compression issue. I looked into it as as best I could figure out was that these magnets could handle 1100 N/mm2 which is about 160,000 psi. But if you had some point or raised area against the magnet maybe it could break even pressing out a bushing.

I am going to try to break one of these to find out. Stay tuned for another vid, maybe next weekend.
 
You must log in or register to reply here.
Back
Top