• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

SOLD Manual mill $2000

Alexander

Alexander

Ultra Member
Administrator
I have more equipment than space in my garage so i have decided to let my nice little horizontal mill go. It runs on 220v single phase and has a 4kw vfd allowing for infinite adjustment of spindle speed. The geared head has 6 spindle speeds and the feed rate has 18 speeds. Machine has mechanical power feed and comes with the horizontal milling arbour. Spindle is mt3
 

Attachments

  • 20190310_101346.jpg
    20190310_101346.jpg
    98.6 KB · Views: 0
  • 20190310_101401.jpg
    20190310_101401.jpg
    75 KB · Views: 0
  • 20190310_101412.jpg
    20190310_101412.jpg
    78.5 KB · Views: 0
  • 20190310_101517.jpg
    20190310_101517.jpg
    99.6 KB · Views: 0
  • 20190310_101438.jpg
    20190310_101438.jpg
    60.7 KB · Views: 0
Last edited:
Alexander said:
I have more equipment than space in my garage so i have decided to let my nice little horizontal mill go. It runs on 220v single phase and has a 4kw vfd allowing for infinite adjustment of spindle speed. The geared head has 6 spindle speeds and the feed rate has 18 speeds. Machine has mechanical power feed and comes with the horizontal milling arbour. Spindle is mt3
Click to expand...
I'm sort of ignorant about milling machines yet... can you briefly tell me advantages or disadvantages of a horizontal milling machine compared to a vertical machine?
 
The main advantages are when drilling large holes the chip evacuation is greatly improved. Also milling cutters are able to be supported from both ends. This allows for slab mills and gang milling. Some milling operations must be done on a horizontal mill due to the length of the part. The only disadvantage i can think of is it is harder to see what you are cutting.
 
I wish I had the money!

I too would like a horizontal mill -- just because


Sent from my iPhone using Tapatalk
 
Here’s what my photo translator gives for the name plate
Suqian Jinma Machine Tool Co . , Ltd . ( Suqian Machine Tool Factory ) Universal Lifting Table Milling Machine Model 57-3S Work Bench Working Face Width 250mm Work Bench Working Face Length 810mm
 
Johnwa said:
Here’s what my photo translator gives for the name plate
Suqian Jinma Machine Tool Co . , Ltd . ( Suqian Machine Tool Factory ) Universal Lifting Table Milling Machine Model 57-3S Work Bench Working Face Width 250mm Work Bench Working Face Length 810mm
Click to expand...
Well that's a cool thing!
 
You must log in or register to reply here.
Back
Top