Reamers end mills and other stuff

[Tom Kitta]

I have about 60 reamers I don't need as well as mostly new large ball end mills, new large 2" em some boring bars, some other tooling. For reamers I think 150. Contact me for other stuff. New ball 1 inch or similar em 20cad. This is left over stuff from auction. About 25% of what I got and some of my old stuff that I replaced.

Sent from my JSN-L23 using Tapatalk

 

[DPittman]

Wow I'm sure there is something I "need" in there....I will be getting back to you with my wish list...

 

[DPittman]

I'm wondering about smaller ball end mills, reamers from bigger than 1/2" to 1". Stuff that would be suitable for small lathe and small milling machine.

 

[Tom Kitta]

I think there are few EM ball that are 3/4 of an inch. Not too many most is large to huge class. I mean I am having issues dealing with the 2" EM. Maybe I can use it in the horizonal machine for surfaces. They also make a nice display item. Nothing says this is a shop as a 2" 12" long EM in 5kg+ class on the wall

 

[Perry]

I would be interested in some of the smaller reamers. If Dpittman only need the large. Anything over 9/16 would probably not be used in my world.

 

[molyknow]

Hey Tom what’s the size range on the reamers? I’d be interested in them I think!

 

[Tom Kitta]

sale of reamers is now pending. all else still available.

 

[Tom Kitta]

my email is [email protected]

 

[Rotaxxx]

I am really in need of some end mills, are they all ball nose? what are you thinking on pricing for some?

 

[Swharfin']

Wife drove down the driveway 13 yrs. ago those big EM's are coffee table art at my house.

 

[Tom Kitta]

Where are you - if you are in Calgary you can come and take a look.

Many are ball nose. Few are regular and there 6 (2 roughing) that are the "table art" style as they are 2" and about 8" to 12" long. I also have some carbide inserted drills as well as carbide tipped and regular. I post a picture of a box of small (1 - 1") indexable end mills (face mills). About 100kg of stuff or so.

What do you need?

 

[Tom Kitta]

Oh and some threading stuff - lots of machine taps for 3/4 NC new.

I may also sort out some MT drills in popular sizes such as 1" 3/4" etc. I have dozens of duplicates I do not need.

 

[Brent H]

@Tom Kitta do you have a 47/64 MT2?

 

[Swharfin']

Where are you - if you are in Calgary you can come and take a look.

Many are ball nose. Few are regular and there 6 (2 roughing) that are the "table art" style as they are 2" and about 8" to 12" long. I also have some carbide inserted drills as well as carbide tipped and regular. I post a picture of a box of small (1 - 1") indexable end mills (face mills). About 100kg of stuff or so.

What do you need?

I'm by Athabasca. A little too far for a browse. I was agreeing with the comment of hanging them on the wall for arts sake. Undeniable value in that lot when I'm in the market I'll certainly see what you have to offer.