-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Tips/Techniques Power draw bar
- Thread starter DavidR8
- Start date
Tips/Techniques
Thanks for the link.
Yes. Watched that way back when I started. But given my background in machine automation I really want a tool carousel and tool changer and that means the draw bar has to be computer controlled. The compressed spring disks for TTS tooling along with a pneumatic cylinder are workable but non-functional for removing R8 tools.
It's the mix that no one has addressed AFAIK.
And as you know I'm big on really deep rabbit holes with lots of side passages.
Xyphota
Ultra Member
I bought this power drawbar off ebay and it has worked really well. I had to machine some custom standoffs for it as the ones included didn’t work very well and were poorly made.