• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Pm45 cnc, tormach etc.

Janger

Janger

(John)
Vendor
Premium Member
http://machinetoolonline.com/PM-45M-CNC.html

I was just looking at the above cnc mill. $6k USD. I assume its a syil rebranded. I see the tormach and others are significantly more money. "Real" (bigger? Designer brand?) cnc mills like haas are $25 or $50k. Lots of prices and options.

Does anybody have a more serious cnc mill? Alex has his cool conversion. ... Anybody else?

I want to start a discussion on this. What is good? What do you get for more money? Is 6k just buying a toy?
 
That's the same machine we picked up, just haven't got around to the cnc change over yet. There's a lot of people out there with a Rf45 or pm45 cnc conversion and they seem to work quite well. Will they compare to a real vmc? Probably not. If you get a feel for it, will you get good results from one? I imagine so. I wouldn't put tormach in the same region as even haas, but they're perfectly acceptable for lighter operations. Half the struggle is getting used to the machine, how rigid it is, speeds and feeds that work well and staying within the parameters for that machine.
 
Yeah, still haven't got anywhere with it so hopefully isn't not too long of a project and my bigger concern is if everything works correctly right off the hop. Should find out soon enough though, it's getting closer to the top of the priority list these days.
 
I don't have any information on that machine from Precision Matthews but I did buy one of his PM932PFD mills. Matt has a great reputation for customer service and getting the best equipment from the Chinese suppliers. I had a couple of small warranty issues that he took care of quickly. I have since sold that mill to buy a bigger one but if I was to buy another new one it would be from Matt.
 
You must log in or register to reply here.
Back
Top