• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Oversized Machining equipment.

Jwest7788

Jwest7788

Joshua West
Administrator
In my recent lot purchase there are several oversized tools. Anyone have any interest in making a deal for them?

I won't list everything off, but let me know if you have a setup that can handle very large tools (~1" lathe tools, 1"+ milling tools)
 
I am interested in the milling tools. I don't have any use for the lathe tools, my little lathe is good with just 1/2" tooling.
 
Thanks @Alexander, I'll tally what I have shortly for discussion.


@Janger I don't believe I have any large size with a smaller shaft. :(

Will double check it all. (I don't look at that drawer often)


Sent from my iPhone.
 
I'm looking for larger indexable holders, 5/8"+, I've got a pile of inserts I picked up and now I need holders! If you've got a Kennametal Top Notch holder thats what I have the most inserts for I think.. I've attached a picture, althought I've got other inserts I need holders for.
 

Attachments

  • Kennametal_top_notch.webp
    Kennametal_top_notch.webp
    71.1 KB · Views: 13
Will get the list together shortly. Pics too. Many of it's already documented in the earlier haul pics. Just stuff that's too big.

Sorry for the delay, was in the woods camping the past few days. Hasn't been forgotten though.
 
Don't apologize for having some summer fun JW. You can sell a lot of the bigger stuff by yourself, just walk into machine shops and show it, the guys are always looking for good tooling deals, specially these days with oil and gas out of business.
 
The best way to get scrap metal for practicing on,, is to go dumpster diving behind machine shops. IE,, Union Pump, at 61 and barlow, tosses lots of old stainless pump shafts. After a while, you get to know whose Calgary Metal dumpster has what.
 
Hey JW: I'm interested in a large tool or two holder perhaps... and maybe some milling cutters. Depending on what is there....
 
Hi JW:

I noticed two angle plates in your photos - are these suitable for your machine or would you consider parting with them?

Thanks,

Brad.
 
BradH said:
Hi JW:

I noticed two angle plates in your photos - are these suitable for your machine or would you consider parting with them?

Thanks,

Brad.
Click to expand...
Good catch, I'm willing to part with them.

I keep forgetting about this thread. Haha

Would you want some measurements, or what were you thinking?

JW
 
You must log in or register to reply here.
Back
Top