Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
i started a new project my dad wanted a face plate for hes very old wood lathe i used a pice of 1/2in aluminum he had a 5/8 IN taper hub that fits on the shaft i am going to use 2 1/4 by 20 socket head bolts to clamp the taper he wants a 4in one as well so i made a pin the fits the 1/2 in hole in thenplate as well as the 5/8 in the hub so it can be perfectly alined when bolting it up so in theory it should be lined up and balanced the same as when it was turned
