-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Multifix clones ?
- Thread starter cuslog
- Start date
Six O Two
(Marco)
abom79 is always talking about pewetools in his vids.
(I linked the french page, since I don't read german or italian, but I'm guessing if you emailed them in English, I'm sure they could help)
There's also Shars
www.shars.com
or direct from China
(I linked the french page, since I don't read german or italian, but I'm guessing if you emailed them in English, I'm sure they could help)
There's also Shars
1" B series Turning and Facing Holder
Original Multifix--Create Tool - Toolholder expert ---- QCTP toolpost | CNC tool holder
Welome to Create Tool, a company who has three generations experts toolholder.Create tool is a company from a manufacturing plant, who has 20 years experience on toolholder produced, from the elder engineer who produce the first multifix toolholder in China to the excellent engineer who research...
www.createtool.com
Dabbler
ersatz engineer
Create tool makes 'A' and 'B' sizes: "Burton's Attic" on youtube did a good review on the one he bought.
Stefan Gotteswinter described a Asian made German variety he also liked. It was about year ago, and he hasn't done that many videos in the last 2 years... (should be findable)
Stefan Gotteswinter described a Asian made German variety he also liked. It was about year ago, and he hasn't done that many videos in the last 2 years... (should be findable)
Last edited:
Well, I'll try Create Tool again. I had tried to order from them (several times) about a year ago. There was a thread on Practical Machinist (about a year ago) saying that the founder of Create Tool had died and the Company was no longer functioning. Their web site still functions though - I'll try them once more as I believe they were the mfr. of the 5 that I have in hand now so better chance of a good fit.
Thanks for the replies.
Thanks for the replies.
opensourcefan
OSF
I just went through this and found out that the owner of Create Tools died and it was passed onto the family who aren't really active. I sent multiple emails and messages through different means and none were answered. I checked the website ip registration and it appeared to not be refreshed.
Anyways, I found this fella on eBay and he was excellent. Out of China, and works for the German outsourced multifix manufacturer.
There are two versions of the clones, the standard EDM cut type and the "Fine Grind" type which are better. I ordered from that fella and all went well.
Follow-up, contacted "Sino-SD" ebay seller. Guy was quite helpful and seemed genuinely "keen" to be sure that I was ordering the right stuff ( I already had a "B series" Multifix set but wanted to add 3 more tool holders). Several messages back and forth, finally sent photos of what I had, from the photos, he could identify the original mfr. Apparently, some are "fine grind" and others are EDM cut, I had a "fine grind" tool post and EDM cut holders.
Placed an order for 3 X B2-BD25120 tool holders on May 26, had them on my doorstep 10:00 AM May 31- 5 days from China (Fedex).
Fit perfect.
Placed an order for 3 X B2-BD25120 tool holders on May 26, had them on my doorstep 10:00 AM May 31- 5 days from China (Fedex).
Fit perfect.
opensourcefan
OSF
Excellent, glad it worked out. Glad to hear about another good transaction with him.