• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Morse taper 4.5 to 5C collet spindle nose adapter

M

Mcgyver

Ultra Member
I'll get a photo shortly, these are the adapters that go into the spindle nose to hold 5C collets with a draw bar. More accurate and solid than a collet chuck. Several lathes use this 4.5 spindle nose as its just big enough to fit a 5C collet (I'm guessing the 4.5 was created for that purpose)

No make indicated but its old school quality, hardened and ground. Came out the Bulova plant in the US and they didn't buy junk.

These seem to go for $175 US on ebay and there is someone selling new ones for just under 200 US...... that look like they've been finished with emery paper!

I'm thinking $175 CDN + shipping.

Let me know via PM if interested

thanks
Mike
 
You must log in or register to reply here.
Back
Top