• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Milling 9-35

B

BlueBird

Member
Hi ! Its hard but i have to sell this one..


MODERN 935VS-1 Milling Machine
Moteur 3 HP, 1 Ph, 220 Volt, 60 Hz
Table 9"-35"
210 – 3200 RPM

Come with DRO, vise, 3jaw chuck, dial compensator, R8 collet set with quick release, parallel bar kit and some endmill.

8500$
Quebec

Thanks
 

Attachments

  • 70452083_2576533532405922_396729096953921536_n.jpg
    70452083_2576533532405922_396729096953921536_n.jpg
    67.4 KB · Views: 0
  • 70514163_2576533612405914_4182514770039013376_n.jpg
    70514163_2576533612405914_4182514770039013376_n.jpg
    98.3 KB · Views: 0
  • 70760522_2576533555739253_6146819106541666304_n.jpg
    70760522_2576533555739253_6146819106541666304_n.jpg
    76.6 KB · Views: 0
  • 70838154_2576533632405912_1004904295792902144_n.jpg
    70838154_2576533632405912_1004904295792902144_n.jpg
    160.6 KB · Views: 0
  • 71027751_2576533579072584_7051263533165576192_n.jpg
    71027751_2576533579072584_7051263533165576192_n.jpg
    53.7 KB · Views: 0
FYI I just sold almost the same machine with larger table (10 x 50), power draw bar and power x feed but no other stuff you include for $4000 - last week - went to BC. It was 1995 vintage.
 
You must log in or register to reply here.
Back
Top