Further to the thread @Brent H started here https://canadianhobbymetalworkers.com/threads/the-pilgrimage-to-calgary.4289/ of his travels out West, find additional details below. He will join us sometime by mid-afternoon.
Here are some details of the meet-up:
Date: 28/NOV/2021
Time: 1300h to 1800h. Brent and his crew should arrive sometime during that time. You can hang around as long as you want.
Location: 240098 Paradise Meadow Drive, Chestermere, AB. It is an acreage.
Just pull up the driveway beside the house and go park in “the back 40” past the shop (Quonset style building). Enter through the man door on the west side if the main door is not open.
General points:
Everyone is welcome. Bring your own warm beverage as there is no heat in the shop yet. It is insulated to R42 and the weather is forecast to be +11*C tomorrow - so should be quite comfortable, but cool. There is a table, bench and some chairs to sit on. If you need to use the facilities in the main house, a mask will be required.
The machines will generally not be powered; however, if there is a specific interest / request to see something run, I can do that. For that reason bring safety glasses. I’ll have some tools / attachments out of my collection on display.
The spirit of this is event is to meet Brent & his crew, exchange stories and hopefully everyone can learn something as well. So all ideas / comments are very welcome.
Cheers, Rudy
Here are some details of the meet-up:
Date: 28/NOV/2021
Time: 1300h to 1800h. Brent and his crew should arrive sometime during that time. You can hang around as long as you want.
Location: 240098 Paradise Meadow Drive, Chestermere, AB. It is an acreage.
Just pull up the driveway beside the house and go park in “the back 40” past the shop (Quonset style building). Enter through the man door on the west side if the main door is not open.
General points:
Everyone is welcome. Bring your own warm beverage as there is no heat in the shop yet. It is insulated to R42 and the weather is forecast to be +11*C tomorrow - so should be quite comfortable, but cool. There is a table, bench and some chairs to sit on. If you need to use the facilities in the main house, a mask will be required.
The machines will generally not be powered; however, if there is a specific interest / request to see something run, I can do that. For that reason bring safety glasses. I’ll have some tools / attachments out of my collection on display.
The spirit of this is event is to meet Brent & his crew, exchange stories and hopefully everyone can learn something as well. So all ideas / comments are very welcome.
Cheers, Rudy
