KeeponDragon
no problems... just challenges
Sellers writeup...
Selling some miscellaneous machining tools;
Metric radius gauges - $20
Metric thread gauges - $20
Machining squares - $50 each
2”x”4”x6” blocks - $200 (for the pair)
1”x2”x3” blocks - $300 (for 11 pcs)
Transfer punch set - $75
1/8” parallels - $125 (some haven’t been opened)
Mitutoyo dial indicator - $100
Noga indicator arm (not pictured) $50
SCLCR 16-3 turning tool (CCMT insert) $75
Indexable fly cutter/chipper mills 3/4” long series - $80
3/4” reg length - $70
5/8” reg length - $60
No low ball offers, open to reasonable offers and bundles
Before I posted, I contacted the seller to see if he was aware of the forum, which he wasn't. So I said I'd share the ad for him.
Seemed like a decent enough fella
Link to the ad
Selling some miscellaneous machining tools;
Metric radius gauges - $20
Metric thread gauges - $20
Machining squares - $50 each
2”x”4”x6” blocks - $200 (for the pair)
1”x2”x3” blocks - $300 (for 11 pcs)
Transfer punch set - $75
1/8” parallels - $125 (some haven’t been opened)
Mitutoyo dial indicator - $100
Noga indicator arm (not pictured) $50
SCLCR 16-3 turning tool (CCMT insert) $75
Indexable fly cutter/chipper mills 3/4” long series - $80
3/4” reg length - $70
5/8” reg length - $60
No low ball offers, open to reasonable offers and bundles
Before I posted, I contacted the seller to see if he was aware of the forum, which he wasn't. So I said I'd share the ad for him.
Seemed like a decent enough fella
Link to the ad