Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
I'm going to need to move my lathe away from wall at some point to finish setting up the taper attachment and i don't want to repeat the method I used to move it to it's present spot. Rolling it around on round bars made me nervous. I've planned to build some skates for years and finally got around to it. The 2 X 3 tubing is compliments of PeterT here and the 32 6205 bearings came from Amazon ($70), some 1" cold rolled round bar and some washers. These should be robust enough to support any machine I'll ever have. I'll road test them later this weekend.
