• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Looking for advice for a lathe/mill

Murdoch

Murdoch

Active Member
HI guys, I'm rather new to the lathe but for my project i thought that I'm going to need one. Trouble is fund's are scarce. I put an ad in kijiji looking for a lathe with possibly a milling attachment starting budget of $500. Could go more if the fit is right. Any thoughts guys, I will be working with aluminum mostly. Just small parts for my exoskeleton War-Machine. Appreciate any advice you can send my way.
I did get a response to my ad today for an Atlas 618...GMurdoch
 
An Atlas 618 is a good starting machine - providing it is in good shape. If you get one with troubles, it takes advanced skills and tooling to set it right. Your budget is good for a small machine needing work, but one in good shape might cost you more. There are great videos on utube doing a survey of a lathe to find major problems.
 
Find like minded local guys and trade back and forth. Post an ad on the forum. Getting some hands on experience with something, anything, will greatly shape your experience and inform you on what you actually want. I went through all that - like everybody else - learning about the equipment and what I wanted to do with it, I then bought bigger gear and sold some of the smaller stuff. Purchasing is a big deal and I suspect you may want more of a lathe than the $500 will get you. Another idea - we have a maker space 'club' here in Calgary. Join and you can use their metal working equipment. I imagine something like that exists out east too.
 
Janger said:
Find like minded local guys and trade back and forth. Post an ad on the forum. Getting some hands on experience with something, anything, will greatly shape your experience and inform you on what you actually want. I went through all that - like everybody else - learning about the equipment and what I wanted to do with it, I then bought bigger gear and sold some of the smaller stuff. Purchasing is a big deal and I suspect you may want more of a lathe than the $500 will get you. Another idea - we have a maker space 'club' here in Calgary. Join and you can use their metal working equipment. I imagine something like that exists out east too.
Click to expand...
I think you suspect right and my budget is probably gonna have to be higher...
 
You must log in or register to reply here.
Back
Top