Looking for a die

[Freelander]

I work on vintage bicycles and need a 1” 24 tpi die for threading the fork steer tube. Have done a lot of threading so I don’t know much about quality or other variables. Not looking for the best. I may use this about three times a year. Thanks, Daryl

 

[RobinHood]

Hi Freelander, i only go up to 1”-12tpi. Might want to consider getting one off ebay. Quick search reveals that they are availble for about $40 Canadian for a Chineese one. Here is the link:
https://www.ebay.ca/sch/i.html?_nkw...f930e341660aa18efc11272fffe4d16&ul_noapp=true

 

[Freelander]

Hi Freelander, i only go up to 1”-12tpi. Might want to consider getting one off ebay. Quick search reveals that they are availble for about $40 Canadian for a Chineese one. Here is the link:
https://www.ebay.ca/sch/i.html?_nkw=1+24+tpi+die&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F1%2F706-35959-8174-0%2F2%3Fmpre%3Dhttps%253A%252F%252Fwww.ebay.ca%252Fulk%252Fsch%252F%253F_nkw%253D1%25252024%252520tpi%252520die%26keyword%3D1%252024%2520tpi%2520die%26crlp%3D191647956454_4087%26MT_ID%3D16%26geo_id%3D34636%26rlsatarget%3Dkwd-37830954572%26adpos%3D1t1%26device%3Dt%26loc%3D9047859%26poi%3D%26abcId%3D853856%26treatment_id%3D7%26cmpgn%3D689829743%26sitelnk%3D%26gclid%3DEAIaIQobChMIrIiUsdX83QIVAcpkCh0lIQ8yEAAYASAAEgJhj_D_BwE%26srcrot%3D706-35959-8174-0%26rvr_id%3D1699055082928%26rvr_ts%3D5f930e341660aa18efc11272fffe4d16&ul_noapp=true

Thanks! I just ordered one.

All the best,
Daryl