• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Lathe & mill, North of Toronto

trlvn

Ultra Member
BusyBee B-244 lathe and B-240 milling machine.

$_59.JPG


$_59.JPG


Is this mill a predecessor to the RF-30 style mill? An internet search for this model number said the table is small but there is a good range of travel in X and Y.

The seller indicated that they are asking "$1k" for the milling machine. I didn't ask about the lathe. It is an estate sale situation and they seem to have little idea what they are selling.

https://www.kijiji.ca/o-profile/1012771454/listings/1

Craig
 
Hello Craig,
I ended up buying both the of these the guys dad was a mill rite for over 40 years. Some of the things I got a very good deal other things were priced higher then new. I’m happy with what I paid but I’m going to sell the lathe and get a standard modern one. So if anyone wants the lathe it comes with 2 3 jaw chucks with 2 sets of clamps also a 4 jaw chuck I paid $1500 asking same runs awesome thanks
 
Welcome to forum, @Gunner . How is the mill working for you? Does the data plate say when it was built? What is the red/black thing sticking up out of the top? R8 or MT spindle? Did it come with a vise or clamping kit? Any other notable goodies?

Craig
 
I haven’t used it yet. That was just some light sitting on there. I don’t think it’s been used much at all. I think it has a Morris taper style spindle abut I’ll keep you updated as I find out more. But it runs perfectly I just wish it had a wider table
 
H have noticed a major problem when I started to work on my mill yesterday the drill cuck came out easy it’s a mt#4 but I couldn’t get the collet nut to move at att. I’m going to today take the spindle out and see if I’m missing something or if I might have to get a new spindle. Does anyone know ware I could find one if that is one strips or if there is other issues ?? Is ran the machine with a 7/16 end mill and it ran perfectly. I’m totally new to your form if I’m posting in the wrong section would you kindly let me know and if possible send it to the right spot. Thanks
 
Ya no problem I would like to know if anyone makes a mt32 collet bar to change out the original bar. Pictures shortly
 
I’m unable to remove this nut. There was a keyed chuck on a taper that came out but I can not get that nut loose. I was wondering if anybody’s is aware of a replacement spindle that I can take that one out and put a MT32 collet one in. Thanks
Gunner
 

Attachments

  • 99CCE032-0423-4C30-A603-088E6B0A42D4.jpeg
    99CCE032-0423-4C30-A603-088E6B0A42D4.jpeg
    240.7 KB · Views: 14
  • D696F85B-FF3B-4CA6-A533-849DB6C48701.jpeg
    D696F85B-FF3B-4CA6-A533-849DB6C48701.jpeg
    238.4 KB · Views: 14
  • CB3410A0-1097-4BB9-958B-9E07F8AE2655.jpeg
    CB3410A0-1097-4BB9-958B-9E07F8AE2655.jpeg
    251.4 KB · Views: 12
Back
Top