• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Lathe Habegger J102 Swiss metal lathe CA$1,500 Cornwall Ont.

combustable herbage

Ultra Member
Premium Member

1712197186960.webp
 
Jeebuz, but I have seen a 111 Tripan Tool post sell (not that I was paying that!)for more than the ask for this lathe!

It's not a "be all to end all" kind of machine, but still, a pretty good buy, IMO!

Pretty good, second operation lathe! Just need to know what the spindle bore and taper is!
 
Jeebuz, but I have seen a 111 Tripan Tool post sell (not that I was paying that!)for more than the ask for this lathe!

He does say no tooling included, so I'm guess it doesn't come with it.

I've got the 5C version of it, pretty rare as far as I can tell. They are a superb lathe, essentially a Schaublin (parts are interchangeable and Habegger worked for Schaublin).

As Trev suggests, an ideal second lathe/second op lathe (you need power feed and thread cutting for the first lathe). Next to no runout, spindle mounted collets and you just pull the whole slide rest off and out of harms way for polishing etc. Here's looking at the runout on mine

.
.

Kind of amazing these sell for as little as they do.

If you want a 102, I've a 20mm Schaublin w/ stand and ton of collets for sale a little more money. (keeping two and a couple of 70's, just don't need another)

 
Last edited:
Back
Top