• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Kurt repair kit

I ordered a kit for my vise directly from Kurt. Shipping was expensive though. I was ordering some other parts as well at the time. The shipping would likely be cost prohibitive if that is all that you need.

Might be cheapest to just bring the parts into a local bearing shop and see if you can find replacements.
 
van123d said:
I ordered a kit for my vise directly from Kurt. Shipping was expensive though. I was ordering some other parts as well at the time. The shipping would likely be cost prohibitive if that is all that you need.

Might be cheapest to just bring the parts into a local bearing shop and see if you can find replacements.
Click to expand...
That makes a lot of sense, thrust bearing is a few $ to my door from Aliexpress, I can make the plastic plug and the washers should be fine. That's assuming the bearing needs replacement might be fine, still waiting for delivery of the actual vise.
 
slow-poke said:
That makes a lot of sense, thrust bearing is a few $ to my door from Aliexpress, I can make the plastic plug and the washers should be fine. That's assuming the bearing needs replacement might be fine, still waiting for delivery of the actual vise.
Click to expand...
why chinch on a 30 dollar part that is already to order from a Canadian vendor? just my 2 cents...
 
Aburg Rapid Prototype said:
why chinch on a 30 dollar part that is already to order from a Canadian vendor? just my 2 cents...
Click to expand...
I have purchased plenty from that vendor, but in this case to save $50.

fifty.webp
 
slow-poke said:
I have purchased plenty from that vendor, but in this case to save $50.
Click to expand...

slow-poke said:
I have purchased plenty from that vendor, but in this case to save $50.

View attachment 30764
Click to expand...
I see... I live less then 20 KM from their Oldcastle outlet. You are mainly talking about the cost of shipping.... I pay no shipping since I go and pickup at their location. I have to go today in fact... but I also am going to pick up other things in Windsor... so its no fuel only for them.
 
PeterT said:
No I mean KBC. They start at about $25 shipping now (Purolator). Used to be $9 or something. I don't think they have a minimum purchase amount. They have a min $499 purchase amount for free shipping, subject to weight restrictions

Terms of Sale | KBC Tools & Machinery

www.kbctools.ca www.kbctools.ca
Click to expand...

OK, that is more or less what I meant. $25 shipping for some small bearings and seals seems too much for me. You made it sound inexpensive. Then again, I'm in Ontario.

But I am like @Aburg Rapid Prototype, there is a store between me and Windsor. So unless I am doing a big enough order to get free shipping, I pickup at the store.
 
KBC charges a minimum amount for shipping ~$25 from recent experience. This used to be ~$9. Free shipping only kicks in with $499 purchase value. Hope this reads clearer now.
 
You must log in or register to reply here.
Back
Top