• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

ISO m12 x 1.25 tap

molyknow

molyknow

Alex
Premium Member
Hey all, I’m looking for an m12 x 1.25 tap in order to finish up a project that is kinda time sensitive. Does anyone in Calgary have one that I can buy or borrow?

Thanks,

Alex
 
I can stroll over to the garage and see how many I have in stock. Do you just need one? The 1.75 is the coarse thread, the 1.25 is standard fine thread. Fine may be a bit rare but it is "standard thread" nothing "special" or custom.
 
QUOTE="Tom Kitta, post: 43023, member: 44"]Isn't M12x 1.25 just a common regular tap, fine pitch nothing special?[/QUOTE]

I believe that 1.5 is fine pitch, 1.25 could be considered extra fine from my research
 
That’s a regular size.
KMS in Calgary has a 12mx1.25 plug tap.
(I can’t see where you live so tough to help)
 
Tom Kitta said:
I can stroll over to the garage and see how many I have in stock. Do you just need one? The 1.75 is the coarse thread, the 1.25 is standard fine thread. Fine may be a bit rare but it is "standard thread" nothing "special" or custom.
Click to expand...

If you have one that would be lovely, yeah I literally need to tap a single hole and don’t have the confidence to do an internal thread with out anything to check the thread against. It’s also a blind hole
 
David_R8 said:
That’s a regular size.
KMS in Calgary has a 12mx1.25 plug tap.
(I can’t see where you live so tough to help)
Click to expand...

It says more coming online :(

Thought I’d check here. Realistically I should just put the project down and finish it tomorrow but I’m so close
 
Ok After 10 min of hard work I discovered I have 10 in stock. Brand new. 12 x 1.25 taps. How many do you need?
 
I can leave you 1 brand new tap and another used machine tap that is for a blind hole. I only have one machine tap so I need that one back. You can keep the regular hand tap for small compensation. Like $5?
 
Tom Kitta said:
I can leave you 1 brand new tap and another used machine tap that is for a blind hole. I only have one machine tap so I need that one back. You can keep the regular hand tap for small compensation. Like $5?
Click to expand...

Your my saviour I’ll message you privately now
 
You must log in or register to reply here.
Back
Top