• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

ISO 5/16ths K style geo die head

mmcmdl

mmcmdl

Machinist/Toolmaker ( retired )
I would ask if all could be on the lookout for the K style head . I think they don't exist down here . I have about 120 sets of useless chasers without the head . TIA Dave

You can pm myself , Dabbler or DavidR8 .
 
Can you put the dimensions of one of the 4 chasers, so people can find likely candidates? I don't think I could tell which size a K style head was.
 
I have never seen this head , but I would assume it is the same physical size as the D style geometrics . I have all D style heads here . The difference with the chasers are D style have slots to mount in the head . The K style has pins . I'll post a pic of the difference in the chasers . I can find lots of information but haven't seen one available anywhere . FWIW , I bought a large box of chasers up at Cabin Fever . On the top were a few D style sets . On the bottom were a 100 or so K style sets .
 
Back
Top