Industrial milling and drill machine combo - $1,950 (Sunshine Coast)

[JustaDB]

Industrial milling and drill machine combo - tools - by owner - craigslist

Hard to find, Replacement cost is over $5,000. heavy duty and high quality (made in Taiwan, not China) 2HP 120V AC single phase (can be used at home or shop on a 15Amp circuit) milling and drill...

vancouver.craigslist.org

 

[YYCHM]

 

[jcdammeyer]

In Cdn $ this is about $2800. Figure $500 get it here but it's brand new. Certainly not $5K

8" x 29" 2 HP Mill/Drill with Stand - Grizzly Industrial

<h1>G0705 8" x 29" 2 HP Mill/Drill with Stand</h1> <h2>A competitively priced mill worthy of being the cornerstone of your shop.</h2> <p>The G0705 8" x 29" 2 HP Mill/Drill has a 2 HP motor and enough table space to make quick work of just about any machining job you can throw at it.</p> <p>The...

www.grizzly.com

 

[140mower]

In Cdn $ this is about $2800. Figure $500 get it here but it's brand new. Certainly not $5K

8" x 29" 2 HP Mill/Drill with Stand - Grizzly Industrial

<h1>G0705 8" x 29" 2 HP Mill/Drill with Stand</h1> <h2>A competitively priced mill worthy of being the cornerstone of your shop.</h2> <p>The G0705 8" x 29" 2 HP Mill/Drill has a 2 HP motor and enough table space to make quick work of just about any machining job you can throw at it.</p> <p>The...

www.grizzly.com

To make matters worse deal-wise, this is like mine and only has a roughly 7x16" table, so, only half the mill you linked to.
As an aside, mine is the only one I have seen with no table locks nor the tee slot running across the front. Talk about a bare bones machine....lol