• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Horizontal mill overarm spindle support?

trlvn

trlvn

Ultra Member
Amongst the dross from my recent auction foray was the following. Is it possibly a spindle support for a horizontal mill?

spindle support sm.jpg


2-3/4 & 2 inch holes, about 5.5 inches centre to centre. Appears to have originally been gray if that helps to ID the part.

This came out of a sheet metal business. No lathe or mill were offered in the sale but there were a fair number of lathe accessories like a quick change tool post system. Also the collets that I have for sale.

If anybody can use this, I'd be happy to sell it cheap. Otherwise, I may well strip off the two locking levers and dispose of the casting.

Craig
 
nope it cannot be. No support for the spindle holding the cutter. Ir might have been used to give extra rigidity to the arms when they are a long way out.
 
Dabbler said:
nope it cannot be. No support for the spindle holding the cutter. Ir might have been used to give extra rigidity to the arms when they are a long way out.
Click to expand...
Are you thinking of a mill with two overarms? I believe there are some horizontals with a single overarm.

OTOH, I noticed after posting that there is no shoulder to register a bearing against.

Craig
 
You must log in or register to reply here.
Back
Top