• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Hi from Armstrong BC.

BAMMAB

BAMMAB

New Member
I have a 20x30 shop out back now for 25 years. Although electrician/control tech by trade I love to fab things whether metal or wood. I got a desktop CNC router early December and have been learning CAD/CAM Carveco Maker. I did AutoCad 13 way back and some of it is similar. Now doing a Gcode course and Easel. Not sure how many CNCers on here but looking forward to exploring and learning. Cheers, Mike.
 
Welcome from Victoria.
I built a PrintNC router about a year or so ago and just recently delved into the laser cutter/engraver world.
 
David_R8 said:
Welcome from Victoria.
I built a PrintNC router about a year or so ago and just recently delved into the laser cutter/engraver world.
Click to expand...
Thanks for the reply. I also have a laser, Genmitsu 5.5w . However, I figure I will get up to speed on the router software before I attempt to learn that. Good to know someone who is delving into this as well.
 
Welcome from lumby I haven't done much yet but I messed around with converting a proxxon mf 70 mini mill and I found vcarve pro very simple to use compared to some other software especially for 2d stuff but in future I plan on making a cnc plasma table once I build a shop
 
BAMMAB said:
I have a 20x30 shop out back now for 25 years. Although electrician/control tech by trade I love to fab things whether metal or wood. I got a desktop CNC router early December and have been learning CAD/CAM Carveco Maker. I did AutoCad 13 way back and some of it is similar. Now doing a Gcode course and Easel. Not sure how many CNCers on here but looking forward to exploring and learning. Cheers, Mike.
Click to expand...
welcome from Toronto.

I hope to join you as a cnc router owning member some time during 2023...
 
Welcome from Ontario farmland.

Lots of CNC happening on here. Even a dedicated section with sub sections.
 
You must log in or register to reply here.
Back
Top