Question is, are all adaptors for surface grinders the same taper ? I got several adaptors with the B&S #13 but they are all LH thread. If I want to use the right hand end of the spindle I need a RH thread adaptor. I went to the mcmaster Carr web site and their adaptors are listed for all surface grinders. I hate to assume anything, so can someone tune me in?
-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Grinding wheel adaptor Question
- Thread starter garageguy
- Start date
Chipper5783
Super User
No. There are smaller grinders or larger grinders and they will have smaller or larger spindles - that's obvious, we won't talk about that. Sticking to the small grinders, there is some variation (the Sopko web site / catalog lists a bunch). My 618 surface grinder and Cinci T&C grinder have very similar spindles, I believe the taper is the same but the way the arbor is secured to the spindle is. The SG uses the small nut and the T&C uses a socket head cap screw (but not a standard one). To answer your question - maybe. The Cinci T&C grinder uses the same arbor on each end of the spindle.
@Chipper5783 I've done more looking since my post and found that Cinci has different adaptors. Mine has the slotted nut and I think the 1" large end taper. will keep digging. Thanks for the replies.