• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Free Metal !

A

Alincochrane

Member
I have been metalworking as a hobby for 30+ years and have accumulated a lot of material. Now we are moving to Vancouver Island and it's time to clean out the shop.

I have a some larger pieces of material I would like to sell (to fund restocking the new shop) - a few samples listed below.
5' x 1-1/4 diam stainless rod $10
26" x 3-1/2" ID (4" OD) hydraulic tube (honed ID) $5 (4 available)
6" long 3-1/2" cored bronze (1-1/4" core) $30
4" long 3-1/2" cored bronze (3/4" core) $20
Various 2' - 5' lengths of steel bar for a couple of bucks a piece

I also have about 1000 lbs of offcuts, bar ends, etc. These are mostly small 6 " - 18" long and from 1/4" to 4" section, square, rectangle, round, hex, tube, angle Mostly mild steel, but some stainless, cast iron, aluminum. All handy sizes for model making, robotics, etc. Also some bits of brass and bronze, springs, pulleys, gears and fixtures - everything free for the taking. Come and pick up a box or two. I would like to get this out of the way by end of April otherwise it goes to recycling.

Also have some tools listed elsewhere on this site.

We are located about 10 minutes north of Cochrane, AB. Email me for address and timing a.bays (at) flare-consultants.com or phone/text 403-615-0370
 
As I continue to clear out the shop I'm uncovering a bunch of surplus stuff:

Motors 1/3hp - 110v, 9-18v DC, treadmill, etc $1-15

20 lb home made anvil - $15

Record 4" bench vice ( like new) - $20

2 axis cross-slide vice - $20

Misc. V-blocks, parallels, M&W 1" micrometer, DTI, ...... what do you need ?

See previous post for contact info.
 
Alincochrane said:
As I continue to clear out the shop I'm uncovering a bunch of surplus stuff:

Motors 1/3hp - 110v, 9-18v DC, treadmill, etc $1-15

20 lb home made anvil - $15

Record 4" bench vice ( like new) - $20

2 axis cross-slide vice - $20

Misc. V-blocks, parallels, M&W 1" micrometer, DTI, ...... what do you need ?

See previous post for contact info.
Click to expand...

I don't suppose you have a precision level for sale???

Don
 
I'm going to be in Calgary next week for a couple of days. I'll contact you then about some of your metal pieces.

John
 
Hi, I am new to metal working as my name suggests :).
I recently bought a vintage drill press from Kijiji and I am interested in your x-y cross-slide vice. Please let me know if I could pass by tomorrow around 11sh to noon. I am also interested in some offcuts as well.
I live in Calgary.
Thanks,
Kal
 
That works best as I do not know exactly when I’ll leave. Can you please share your number? Mine is 4035421167
Also your address to lookup how long the trip will take
 
Thanks for the metal pieces I picked last evening Al. They will come in very handy. Good luck with your upcoming move.
 
Thanks Al as well. Actually one small piece threaded on one side and terminating in a circular disk with 3 pins unexpectedly came very handy as it fitted my stand light bracket and the three pins will hold my copper heat sink with the LED wafer on top. Pictures will follow after the project is finished. JAnger is helping me out with building the cap/ reflector from sheet metal.
 
You must log in or register to reply here.
Back
Top