• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Etch Fold Tool (small brake)

Janger

Janger

(John)
Vendor
Premium Member
I have a good book on sheet metal work "Sheet Metal Work" by Marcus Bowman, Crowood press.

https://www.chapters.indigo.ca/en-c...=sheet+metal+work+bowman&ikwsec=Home&ikwidx=0

On the cover is a neat little box pan folding tool. It's for bending tiny photo etched metal parts for various model making. I'd never heard of that before but it looked like a neat little project for Christmas. This was a good CNC CAD/CAM exercise. I also used some of the new MZT carbide end mills I bought from China. I'm pretty pleased with how this is turning out. This is going to be a gift.
 

Attachments

  • E3FFE069-BE76-4692-B2F7-A3EAD875304B.png
    E3FFE069-BE76-4692-B2F7-A3EAD875304B.png
    578.2 KB · Views: 0
CAD and CAM path. Note I am milling from the side holding the part edge at the top of the vise.

Lots of little lines is the tool path in the simulation. Fusion is turning out to be quite productive for me. This estimated 35 minutes on the mill. I think I managed it in about an hour. Picture is what it looked like right after machining.
 

Attachments

  • Screen Shot 2019-12-22 at 11.00.12 AM.png
    Screen Shot 2019-12-22 at 11.00.12 AM.png
    268.3 KB · Views: 0
  • Screen Shot 2019-12-22 at 11.12.46 AM.png
    Screen Shot 2019-12-22 at 11.12.46 AM.png
    533.3 KB · Views: 0
  • Screen Shot 2019-12-22 at 11.13.35 AM.png
    Screen Shot 2019-12-22 at 11.13.35 AM.png
    452.1 KB · Views: 0
  • 661115FE-F8A6-491F-A28A-802C7C2EF22E.jpeg
    661115FE-F8A6-491F-A28A-802C7C2EF22E.jpeg
    104 KB · Views: 0
  • Screen Shot 2019-12-22 at 12.09.08 PM.png
    Screen Shot 2019-12-22 at 12.09.08 PM.png
    227.3 KB · Views: 0
I bought this sander 3x79" and 2hp for me for Christmas. It’s on sale at BB, there is a similar model from King at KMS. I’m still trying to learn how to use it well but I am finishing parts with it - it’s working pretty well and is much faster than my little 4x36 bench sander. Here I’m sanding the backing plate for the etch fold tool.
 

Attachments

  • 647D8CB2-7AAB-4C44-932D-EBB1C9DD9901.jpeg
    647D8CB2-7AAB-4C44-932D-EBB1C9DD9901.jpeg
    137.9 KB · Views: 0
  • E8D70292-3363-4552-9375-AEF86FA6A5D5.jpeg
    E8D70292-3363-4552-9375-AEF86FA6A5D5.jpeg
    120 KB · Views: 0
Last edited:
Couple of knobs from busy bee and a backing plate. Coming along - now I need a folding knife for it.
 

Attachments

  • D84CE923-5FB0-47D0-AAE6-911ED6A14BBB.jpeg
    D84CE923-5FB0-47D0-AAE6-911ED6A14BBB.jpeg
    119.1 KB · Views: 1
Sander: a tool I still search for. the envy grows as I really need to get together more parts for a build, and I really like the bender, reminds me of the large bender in my high school, but with stationary feet (segmented bits) and tiny, I’m sure it’s purpose built which negates any real need for the segmented bits of varied width.
 
You must log in or register to reply here.
Back
Top