I’ve got 12 lots of endmills to sell, 119 in total lightening the load so to speak. Please read for the details.
All are new, sharpened or like new. If they didn’t feel like just came out of the box, I didn’t include them. Most are HSS and single ended unless noted/shown.
On the sharpened ones, beginners sometimes worry about sharpened end mills, but imo it’s irrelevant. You don’t rely on the cutter dia; , you mill then measure or in the case of cnc, enter the cutter dia. So .495 is as good as .500 (imo). Sharpening appears to be professionally done.
These came out of a commercial guy’s kit. Decent quality makes, Sowa, and YG predominate and there are some Clarkson as well. These appear to be endmills that sell in $20 – 30 + range depending on size. The lots are priced around ¼ -1/3 of retail as best I can figure.
Loose EM’s have been wrapped so they don’t bang around.
As they are bagged and stored, I don ‘t want to start going through measuring and checking to answer questions. In light of that, and because you have to take my word for it that these are really sharp, good cutters, I will offer a money back guarantee. For say a week or two after you get them,, and haven’t used any of the cutters, l will on their return refund your money less my cost to ship. I think they are in excellent shape, but don’t want any members thinking they didn’t get what they bargained for.
If there is a discrepancy between what I’ve written, and the photo, the photo rules and is what will be sent – they were all bagged when photographed so what you see is what you get. If you want a lot, please PM me. If more than one party wants a lot, I’ll go by who first committed via PM. Want all of them? 10% off. Was going to through in a rotisserie chicken but they don't ship well.
Shipping via Canada Post. If you taking several groups, your call on insurance or not, but if you don’t want it its at your risk
Happy milling!
Lot 14
Lot 15
Lot 16
Lot 17
Lot 18
Lot 19
Lot 20
Lot 21
Lot 22
Lot 25
Lot 26
Lot 28
All are new, sharpened or like new. If they didn’t feel like just came out of the box, I didn’t include them. Most are HSS and single ended unless noted/shown.
On the sharpened ones, beginners sometimes worry about sharpened end mills, but imo it’s irrelevant. You don’t rely on the cutter dia; , you mill then measure or in the case of cnc, enter the cutter dia. So .495 is as good as .500 (imo). Sharpening appears to be professionally done.
These came out of a commercial guy’s kit. Decent quality makes, Sowa, and YG predominate and there are some Clarkson as well. These appear to be endmills that sell in $20 – 30 + range depending on size. The lots are priced around ¼ -1/3 of retail as best I can figure.
Loose EM’s have been wrapped so they don’t bang around.
As they are bagged and stored, I don ‘t want to start going through measuring and checking to answer questions. In light of that, and because you have to take my word for it that these are really sharp, good cutters, I will offer a money back guarantee. For say a week or two after you get them,, and haven’t used any of the cutters, l will on their return refund your money less my cost to ship. I think they are in excellent shape, but don’t want any members thinking they didn’t get what they bargained for.
If there is a discrepancy between what I’ve written, and the photo, the photo rules and is what will be sent – they were all bagged when photographed so what you see is what you get. If you want a lot, please PM me. If more than one party wants a lot, I’ll go by who first committed via PM. Want all of them? 10% off. Was going to through in a rotisserie chicken but they don't ship well.
Shipping via Canada Post. If you taking several groups, your call on insurance or not, but if you don’t want it its at your risk
Happy milling!
| Lot | # cutters | Price | Notes |
14 | 10 | $ 70 | large endmils are 5/8 and 3/4, yg sowa |
15 | 10 | $ 70 | SOLD mostly YG, Sowa |
16 | 10 | $ 80 | a couple are carbide, sowa, yg |
17 | 10 | $ 60 | ball end mill left is carbide, Sowa, YG Clarkson, all sharp, large one modified hence lower lot price (but still sharp) |
18 | 10 | $ 50 | mostly YG, Sowa |
19 | 10 | $ 60 | mostly YG, Sowa |
20 | 10 | $ 60 | small are carbide, sowa, YG Clarkson |
21 | 10 | $ 70 | YG, Sowa, Clarkson |
22 | 11 | $ 40 | SOLD mostly YG, Sowa |
25 | 13 | $ 75 | SOLD a couple of ball end mills, sowa, YG |
26 | 15 | $ 80 | sizes down to 3/32, 5/64, mostly yG |
28 | 10 | $ 70 | mostly YG, Sowa |
Lot 14
Lot 15
Lot 16
Lot 17
Lot 18
Lot 19
Lot 20
Lot 21
Lot 22
Lot 25
Lot 26
Lot 28
Last edited:
