• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Electric milling machine $3000 Dewberry AB

Jswain

Jswain

Joe

Attachments

  • Screenshot_20240412_144413.jpg
    Screenshot_20240412_144413.jpg
    245.7 KB · Views: 43
The zip ties holding the gear levers in position raises some concerns. As does the profusely leaking gearbox. And the hacked in VFD.

Don't think it's worth that, but probably won't be around long
 
Jayham said:
The zip ties holding the gear levers in position raises some concerns. As does the profusely leaking gearbox. And the hacked in VFD.

Don't think it's worth that, but probably won't be around long
Click to expand...
I was wondering if he did that because he just uses the VFD to change speeds and maybe he has the rpm set on the VFD in that gear?

It looks rough, but who knows under all the slime.
 
Jswain said:
I was wondering if he did that because he just uses the VFD to change speeds and maybe he has the rpm set on the VFD in that gear?

It looks rough, but who knows under all the slime.
Click to expand...

Could be, why not just remove the handles? I'd shift the gears and make sure they engage if I were looking at it.
 
Jayham said:
Could be, why not just remove the handles? I'd shift the gears and make sure they engage if I were looking at it.
Click to expand...
Hard to say why people do what they do, but I agree with you lol.

Maybe it's been used mostly for drilling with that little x/y vise on it. The y gib screw looks like it has a lot of adjustment left.

Never really know til you go look.
 
Mcgyver said:
Could be, but when I see that I think "there's a guy who almost certainly didn't oil the thing when he used it". Speaks to me of an attitude toward how you treat your things so it would have to be a fraction of that price to compel, but that's just me. Working hard on getting old and crusty :)

Related to Karen dreamland perhaps? https://canadianhobbymetalworkers.com/threads/lantaine-peachland-4-900.10795/
Click to expand...
The updated price of $1800 is a pretty good deal on an RF45 really.(In Alberta, if the internals are all ok)
 
You must log in or register to reply here.
Back
Top