Duct work and pipe

[Brent H]

Does anyone in the Ontario area have a need/want or fetish for duct work- elbows, bends, square duct, round duct etc? I have a bunch of fittings that need a home.

Also I have a bunch of pipe cut offs and several bins of fittings from 1/2” to 2”. There is a 100 or so feet of 2” in 10 foot lengths.

If there is some interest let me know and I will get some pics. We got hit with massive snow so I will need to dig things out.

Also have a bunch of tubing and some 2” pex gas line.

 

[architect]

I'll grab the to make some funky art sculpture stuff in the distant future Unless someone else has real productive use for them!

 

[TorontoBuilder]

Does anyone in the Ontario area have a need/want or fetish for duct work- elbows, bends, square duct, round duct etc? I have a bunch of fittings that need a home.

Also I have a bunch of pipe cut offs and several bins of fittings from 1/2” to 2”. There is a 100 or so feet of 2” in 10 foot lengths.

If there is some interest let me know and I will get some pics. We got hit with massive snow so I will need to dig things out.

Also have a bunch of tubing and some 2” pex gas line.

IF only I had storage... I do occasionally still install ductwork when someone I know guilts me into it.

I wonder if I am familiar with @architect 's work? the professional work rather than the art work. I have plans to make iron sculptures when I get better welders

 

[architect]

Just dreaming up things to do and justifying my hoarding Building iron sculpture is on my longterm todo list as well.

I don't really have the space either but also hate seeing things get thrown out (I have a problem). If no one wants them and I grab them they will probably sit in my backyard outside with a tarp over it for awhile.

 

[TorontoBuilder]

Just dreaming up things to do and justifying my hoarding Building iron sculpture is on my longterm todo list as well.

I don't really have the space either but also hate seeing things get thrown out (I have a problem). If no one wants them and I grab them they will probably sit in my backyard outside with a tarp over it for awhile.

i shall say for the thousandths time.... we need an industrial maker space in Toronto.

 

[Brent H]

There is quite a load - not something for a car @architect - unless you’re gonna make a few trips.

There is about 5 decent size boxes of duct work and also a bunch of pvc stuff. Several milk crates of fittings and a large crate of pipe cut offs (like 3 x 5 feet and 2 feet deep. I will see if I can get a couple pics

 

[Brent H]

We also have a 100k gas boiler - brand new - mice got at the insulation a bit but it is here.

Anyone have a radiant (water/glycol) heated space? I have a new 6.5 KW radiator (needs a blower to work)

Stand by for a few pics

 

[Brent H]

I have to dig out the rest of the stuff as we went from zero to 2 plus feet over the weekend.

 

[Darren]

can the boiler be converted to LPG?

 

[Brent H]

I do believe so @Darren it is a Slant Fin and according to my boy is “obsolete”. I will check with him if the propane jets can be obtained or they may be tucked away in the unit.

 

[Susquatch]

I will check with him if the propane jets can be obtained or they may be tucked away in the unit.

I think it's cool that some outfits do that. I found natural gas jets taped inside my propane barbeque.

No big deal if they are not there though. I could give you the name of this very talented fellow who just happens to be moving out east. He could make them for you after he unpacks his lathes.......