• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Does anyone recognize what manufacturer this is?

YYCHM

YYCHM

(Craig)
Premium Member
1630360376089.webp


It's a large shaper.
 
I have been trying to help Kevin identify the shaper.

We now think that the logo has two letters in it: an “I” and a “w”. I thought it could also be a “J”. But we have reason to believe the machine is from Europe. So an old gothic German “I” looks very close to what is in the picture.

5678BF17-64E1-4F4A-A9F1-81679959A250.jpeg
 
[mention]johnnielsen [/mention] any idea why the base and body were separated by about 1” with spacer blocks ( basically made it one inch taller)


Sent from my iPad using Tapatalk
 
You know Kevin, I never noticed that it was blocked up. It certainly wasn't done by me. It was about 5 inches too low for me as it was since I used it to make millions of bends in stainless steel wire (3/32 to 1/4 inch diameter) and spent endless hours standing in front of the ram.
 
You must log in or register to reply here.
Back
Top