Years ago, I had a nice craftsman (atlas) 12x36 lathe. While cleaning up my machinist box, I found a nut that goes on the threaded spindle. It may be to protect the threads or possibly for a collet setup. Anyways, I do not need it, if someone can use it, you can have it for the cost of postage. I live in Ontario in the Barrie area.
-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Craftsman 12x36 spindle nose nut
- Thread starter smanzer
- Start date
It is 8 TPI, inner bore is 1 3/8", outter diameter at small end is 1 15/16, large end is 2 1/16".
Ain't gonna work for me. Seems like an odd size???
Late-model Craftsman 12" Lathes
History and development of the Craftsman, Dunlap, Companion, Metalcraft, Metalmaster, AA109, 109, Simpson and Courlan and manufactured by the American
www.lathes.co.uk
If you go down the page a ways it says 1.5-8tpi.
1 3/8 is probably the inner dia of the thread.
Based on that I'll take a chance. Thanks!