• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Couple more pictures for B2227L guy

Tomc938

Tomc938

Ultra Member
Premium Member
Couldn't post pictures in a DM, so here they are:

IMG_9985.JPG
IMG_9985.JPG
IMG_9986.JPG
IMG_9987.JPG
 
That’s a nice clean looking machine. Is that live centre spring loaded. And when you were showing me the power cross feed that was on this machine right.
 
Tharm said:
That’s a nice clean looking machine. Is that live centre spring loaded. And when you were showing me the power cross feed that was on this machine right.
Click to expand...
I've tried to take good care of it, keep everything oiled and free of chip buildup.

The centre is not spring loaded. It is extra long so you can work closer to the tailstock. Spring loaded would not give you the rigidity you want. Sideways tool pressure could pop it right out of the centre.

And yes, the power cross feed is on the actual lathe. Still the only one I have - until Friday when the bigger one arrives.
 
You must log in or register to reply here.
Back
Top