• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

combining two of my hobbies

Colten Edwards

Colten Edwards

Fabricator
Here I'm combining two of my hobbies. I 3d printed a bunch of BXA tool holders which screw to the wall. Also a couple of key holders. If you look closely, you'll also see a 3d printed indicator holder which attaches the the tool post. Currently on the delta printer there are 3 morse taper 2 and 3 morse taper 3 holders being printed with 95% infill. basically solid PLA at this level of infill. 17 hours to print the 6 holders.
 

Attachments

  • IMG_0421.jpg
    IMG_0421.jpg
    154.4 KB · Views: 0
  • IMG_0422.jpg
    IMG_0422.jpg
    192.8 KB · Views: 0
  • IMG_0423.jpg
    IMG_0423.jpg
    124.4 KB · Views: 0
You must log in or register to reply here.
Back
Top