No laughing!!!!!!!!!!! But I downloaded fusion 360 to draw simple 2 d sketches for parts that I want my local water jet shop to do. Trying to up my game from pencil and box lid drawings. Well hell, I’m lost.. Back a decade or two ago I used Correl draw. Simple. What do you use? Not looking to do anything extravagant, just simple 2 d parts. Guidance needed.
-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Tips/Techniques Cad
- Thread starter Shoprat
- Start date
Tips/Techniques
I use fusion 360, you have to do a bit of a work around on the free version to export the DXF, but it's really not difficult
There are many good videos on fusion, I find it quite easy to use, just a little practice and you'll get the hang of it
The only thing I found when exporting DXF files, make sure you have no stray construction lines or they will translate into the DXF as a cut line
There are many good videos on fusion, I find it quite easy to use, just a little practice and you'll get the hang of it
The only thing I found when exporting DXF files, make sure you have no stray construction lines or they will translate into the DXF as a cut line
TorontoBuilder
Sapientia et Doctrina Stabilitas
Start a new drawing
goto document settings menu, and change to imperial because metric sucks eh.. shown at the black dash in the pic
then pick a view you wish to draw upon in the upper left, and then start a sketch at menu circled.
This should take you to something you can relate to in 2d
Dan Dubeau
Ultra Member
If you're used to corel draw, then give inkscape a try. It's pretty much free corel draw. Might do what you want to generate vector files for plasma.
Last edited:
TorontoBuilder
Sapientia et Doctrina Stabilitas
anyone starting in fusion should learn to master sketches the proper manner if they wish to progress to 3d modeling because the results depend on good solid foundation sketches with proper constraints
Sketches in Fusion 360
Sketches in Fusion 360
Yes, plenty of you tube tutorials on anything and everything fusion360 related
If you come across something you can't figure out, there are probabaly 5 YouTube videos explaining how to do it
When I first started to learn how to draw things for the plasma table/3d printer I tried a few different programs, but in the end fusion seemed to be the most developed, the most capable, and easiest to use. Working around the free version isn't that big of a deal.
It's worth figuring out, and once you get the hang of sketches progressing to modelling is a cinch, just another YouTube video
When I first started with F360, I was baffled by how limited the sketch environment was. I was expecting it to be full featured like AutoCAD.
Took me a while to wrap my head around it being a solid modelling program and that Sketches->solid models->Drawings (or other types of outputs, like simulations).
Took me a while to wrap my head around it being a solid modelling program and that Sketches->solid models->Drawings (or other types of outputs, like simulations).