Acu-rite II DRO connector

[grizzlychicken]

Hi all!
So I recently purchased a standard modern lathe that came with an acu-rite DRO. Unfortunately the connector pin is melted/crushed.
I’m looking to source a replacement connector.
An ideas where to look?

Shane

 

[Tomc938]

I might have one for you. I’m working toward TouchDRO as one of the boards in my unit is toast. When I go Touch DRO I was thinking of changing the ends to a standard plug.

Might have a total unit if you are interested. Other than the one card everything else seems to work as it should.

Where are you located?

 

[slow-poke]

Your image looks like this: https://www.digikey.ca/en/products/detail/amphenol-industrial-operations/MS3112E10-6S/378659

I think this is the mating plug: https://www.digikey.ca/en/products/detail/pei-genesis/PT06A10-6P-SR-LC/5692481

 

[Tomc938]

This is what I have:

 

[Tomc938]

I would wonder why/how the connector got fried.

 

[Tom O]

Cable caught in the chuck or apron maybe.

 

[grizzlychicken]

I might have one for you. I’m working toward TouchDRO as one of the boards in my unit is toast. When I go Touch DRO I was thinking of changing the ends to a standard plug.

Might have a total unit if you are interested. Other than the one card everything else seems to work as it should.

Where are you located?

Hi Tom,
I’m in Alberta. The rest of the unit seems to work just the plug is the issue.where are you at? Let me know if you are changing your plug
Up!

 

[BaitMaster]

I think @slow-poke nailed it

 

[DmechDesign]

From the manual in case you need the pinout

 

[Tomc938]

From the manual in case you need the pinout

View attachment 48811View attachment 48812

Thanks! Very helpful.

 

[Tomc938]

Hi Tom,
I’m in Alberta. The rest of the unit seems to work just the plug is the issue.where are you at? Let me know if you are changing your plug
Up!

I will shoot you a PM so we don't lose each other.

I will keep you in mind. Hope to build the TouchDRO interface this fall.

I'm on Vancouver Island.

 

[grizzlychicken]

From the manual in case you need the pinout

View attachment 48811View attachment 48812

Awesome thanks!

 

[grizzlychicken]

Thanks everyone for the help. Look like this plug is the most cost effective when I googled the plug type from the tech docs:

https://www.digikey.ca/en/products/detail/amphenol-industrial-operations/PT06A-10-6P/2510838?utm_adgroup=&utm_source=google&utm_medium=cpc&utm_campaign=Pmax_Shopping_DK%2B%20Supplier_GEM%20Suppliers&utm_term=&utm_content=&utm_id=go_cmp-21018510932_adg-_ad-__dev-m_ext-_prd-2510838_sig-CjwKCAjwmrqzBhAoEiwAXVpgoo8UBLApNI_GqCGcKeA2uMi8u_Pwp9rWxSX5c0d-sIYxKjYCO49LUBoCm-wQAvD_BwE&gad_source=1&gbraid=0AAAAADrbLli3Wv3KfvNTiLnV8pdqUSYCA&gclid=CjwKCAjwmrqzBhAoEiwAXVpgoo8UBLApNI_GqCGcKeA2uMi8u_Pwp9rWxSX5c0d-sIYxKjYCO49LUBoCm-wQAvD_BwE