A hydraulic chuck transfer plate was repaired(2023.02.16)

[a smile]

Bought an 8 "chuck, with a transfer plate, but not suitable for my lathe installation, very unwilling to give up, so to modify the use.

The root of my lathe is D6, and the basic size of the disc measured is basically the same as that of D6:106.375/133.4/7.125.

According to the size of D6, hole drilling, reaming

Then make some of your own

If you don't need it, please don't throw it away, I will reuse it!

 

[RobinHood]

Very well done.

Can you show us some of your machines…

I see you have a Deckel milling machine. Is it a MAHO?

What lathe do you have?

 

[Dabbler]

Nice lathe! I'd guess a Colchester Master? 16"? The speed change coloured dial looks familiar...


my gear in my signature...

 

[a smile]

做得太好了。

你能给我们看看你的一些机器吗……

我看到你有一台 Deckel 铣床。是MAHO吗？

你有什么车床？

The most used lathe is the reiden-T200, one wmw-200-500, two milling machines, DECKEL-FP3, and one FP5/MH80

JUNG-415

REIDEN-T200

 

[Dabbler]

Very nice!!!

 

[a smile]

Change the handle

 

[a smile]

 

[RobinHood]

Thanks for sharing pictures of your shop and machines. You are very well equipped and know good quality machines.