• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Tool A couple of power files.

Tool

toglhot

just a Backyard Butcher.
I made these two power fies, to be used away from the shop where power is not available.

The first was made from a block of Delrin, but the motor was too underpowered. It worked but tended to get very hot.

The second was made from a lump of 10mm ally, using a bigger motor. Plenty of power but the motor spins too slow, it works ok, but would be better with a faster RPM motor.

Both can be powered from a car battery or a cordles drill battery.
 

Attachments

  • belt3.jpg
    belt3.jpg
    176.3 KB · Views: 18
  • belt4.jpg
    belt4.jpg
    185.6 KB · Views: 18
  • image_18890.webp
    image_18890.webp
    144.5 KB · Views: 16
  • image_18891.webp
    image_18891.webp
    121.7 KB · Views: 17
Cool build, what motors did you use ? That second one looks almost like a blower motor

I gotta ask, what is the situation you find yourself in that you needed these ? I imagine there must be a specific use you built them for ?
 
Back
Top