Stellrammer
Well-Known Member
At some point when I was reselling bandsaw blades I placed an incorrect order with my supplier, instead of ordering 1/2 “ wide I ordered 3/8 wide.
These are carbon steel, for those ubiquitous Enco vertical/ horizontal bandsaws.
These will work fine when in the vertical position on the platen but not vertically on material in the vise, 1/8” shy of depth to cut through.
They are from the same supplier to Princess Auto
.
I think I have both 14 and 10 TPI.
Free if you can pick them up or pay for shipping from South Western Ont. N0L 2C0
Cheers Tim
These are carbon steel, for those ubiquitous Enco vertical/ horizontal bandsaws.
These will work fine when in the vertical position on the platen but not vertically on material in the vise, 1/8” shy of depth to cut through.
They are from the same supplier to Princess Auto
.
I think I have both 14 and 10 TPI.
Free if you can pick them up or pay for shipping from South Western Ont. N0L 2C0
Cheers Tim
Last edited: